Power Supply Cable For Antminer S7 S9

Specifications
1.PSU Mining Power Supply
2.Vy00074
3.Shell Material:Aluminum 
4.Size:25.5 x 9 x 4.5 cm 
5.Cable Length: 39 cm 
6.Power Cord Length: 1.5 Meter 
7.Connectors: 6 PIN X 60 Pcs 
8.Number of Interfaces:6 
9.Fit For: S9(12.5T/13T/13.5T) S7 L3+D3 APW3 Ant Series Mining Machine 
 
 
Input Characteristic
1.Voltage Range: AC 176~264 V 
2.Input Rated Voltage: AC 200~240 V 
3.Starting Inrush Current: ≤80 A 
4.Maximum Input Current: ≤10 A(1600W),≤15 A(1800W) 
5.Efficiency: ≥92% 
 
 
 
 
Output Characteristic
1.Output Rated Voltage:DC 12.25 V 
2.Load Regulation: ≤±2% 
3.Linear Regulation: ≤±1% 
4.Rated Output Power:1600W(Max)/1800W(Max) 
5.Output Current: 0~130 A(1600W),0~150 A(1800W) 
6.Output Ripple And Noise: ≤180 mVp-p(1600W),≤120 mVp-p(1800W) 
7.Drive And Shut Down Overshoot Range: ≤±5% 
8.Rise Time: ≤100 ms(230 V rated load test) 
9.Boot Time: ≤3S(230 V rated voltage test) 
10.Hold Up Time: ≥10 mS(230 V rated voltage test) 
 
 
 
 
 
Environment Conditions
1.Input Under-voltage Protection Point: ≤180 V 
2.Input Under-voltage Recovery Point: ≤185 V Can automatic recovery, the 3.backlash is not less than 5V)
4.Input Over-current Protection:  
Yes (The over-current point is between 130~160A) 
5.Output Short-circuit Protection: 
Yes (Recovery after removal of short circuit) 
6.Input Over Temperature Protection: Yes (When the temperature switch is higher than 100 degrees, protect, turn off the 12V output, and the temperature can be restored automatically below 65 degrees centigrade.) 
 
 
Environment Conditions
1.Operating Temperature: -40~+50℃ Full Load (Typical value is 25 ℃) 
2.Storage Temperature: -40~+85℃ (Typical value is 25 ℃) 
3.Operating Humidity: 5~95% Frost-free 
4.Storage Humidity: 0~95% Frost-free 
5.MTBF: 50000 H (Typical value is 25 ℃) 
6.Altitude: ≤ 5000 m (Normal Work)